issue: 11 i3 date: 13-02-2013 the surface of the cylinder crystal, within this device, may sometimes be exposed through the surface of the moulded resin body; this in no way affects the operation or characteristics of the device. in line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice iso9001:2000 registered customer to specify: frequency tolerance, load capacitance dl max tstg topr k tc please see drawing +25c 5c please specify symbol 65k ? w ( 0.1 w recommended ) tsol fa aging reflow profile 260c max x 5 secs x 2 times (max ir reflow) please specify 12.5pf (7.0pf option) 0.8pf typical c l c 0 esr load capacitance shunt capacitance temp storage range fo frequency range frequency tolerance frequency v temperature @25c turnover temperature equivalent series resistance -40 ~+85c the act711s is an ultra thin, plastic moulded package with a maximum height of 1.4 mm. the package contains a highly reliable cylinder type quartz crystal and is ideally suitable for automatic insertion, especially where pcb component mounting space is at a premium. applications include wireless communications equipment, pagers, pdas, cellular phones, portable applications, and a variety of clock sources. temp operating range tel : 0044 (0)118 979 1238 fax : 0044 (0)118 979 1283 email : info@actcrystals.com temp. coefficient tp ? http://www.actcrystals.com drive level act711s specification 20ppm, 50ppm, 100ppm specification parameter pad plating material snbi
reel dimensions (mm) carrier tape dimensions (mm) standard reel quantity 3.000 tape peel strength: issue: 11 i3 date: 13-02-2013 act711s tape & reeling specification cont'd act711s reflow soldering profile http://www.actcrystals.com for quotations or further information please contact us at: in line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey, uk tel : 0044 (0)118 979 1238 fax : 0044 (0)118 979 1283 email : info@actcrystals.com iso9001:2000 registered using method above the force to start the tape peeling with a pull speed of 30010 mm/min shall be 0.1~1.3n.
standard reel quantity 3.000 material tape a_pet reel cardboard orientation in carrier tape layout of tape no components 20 pockets minimum cover tape leader 150mm minimum start of carrier tape bent vertically and hooked into reel slot. cover tape overlap issue: 11 i3 date: 13-02-2013 iso9001:2000 registered in line with our ongoing policy of product evolvement and improvement, the above specification may be subject to change without notice for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey, uk tel : 0044 (0)118 979 1238 fax : 0044 (0)118 979 1283 email : info@actcrystals.com act711s tape & reeling specification http://www.actcrystals.com
example : se 0 0 0 0 3 g i - pf (act711s) (32.7680khz ) (20ppm) (-40+85) (rohs) package l = loose d = 3k reel - pf m 7 h 12.5 code g n p i -40+85 notes : 1) 2) 3) stability over operating temperature (oc) please refer to the data. issue: 11 i3 date: 13-02-2013 for quotations or further information please contact us at: 3 the business centre, molly millars lane, wokingham, berkshire, rg41 2ey, united kingdom http:www.actcrystals.com tolerance (pm) @ 25oc ppm 20 50 100 commodity code 854160 00 00 iso9001 registered operating temperature range (oc) full example part number se0003gihd-pf 32.768khz other tolerances, cl's and other operating temperature ranges may be available. as each of these specification parameters impact on each other, it is not always possible to combine all options in one device. therefore, if a specification not catered for above is required, please contact us directly for the relevant part number code(s). act are always happy to consider truly custom specification parts which may require non-standard specification parameters, specific testing, customer requested aql requirements, non standard packaging or taping and reeling and custom marking. ( moq dependent ) such devices would normally be allocated a custom specification ( an act711s device may have a part number such as se00003c- c1101-pf) nb: it is important to suffix the above part number with the full frequency required to give a completed part number as illustrated below 00003 = 32.768khz ( only 32.768khz ) example act711s watch crystal ( 32.768khz ) - part numbering & commodity code h d (12.5pf) (3k reel ) frequency to 999.9999khz 1st five digits of frequency ( see available frequency range on data sheet. ) load capacitance ( pf or series resonance) rohs comp' device series code 711 s = se
|
